FASTENERS · THREADED COMPONENTS

Thick Hex Flange Nuts

Thick Hex Flange Nuts combine a deeper hexagonal body with an integrated flange that provides a broad bearing surface beneath the nut. This configuration supports threaded fastening assemblies where additional nut body height, wrench engagement and load distribution at the joint are important design considerations.

The thicker hex profile provides more material around the internal thread than a standard-profile flange nut of comparable thread size. The integral flange increases the contact area against the mating component, helping distribute clamping pressure across a wider surface. These structural characteristics make thick hex flange nuts suitable for mechanical assemblies that require a robust nut profile and a stable seating interface.

01Thick Hex Body
02Integrated Flange
03Wide Bearing Surface
STRUCTURAL PROFILE 01 / 03
Thick hexagonal body
Internal thread
Integrated flange
01 / CONSTRUCTION

Structural Features of Thick Hex Flange Nuts

The nut body and flange work together to provide the required threaded engagement and seating geometry. Both dimensions should be considered when selecting a fastener for a specific assembly.

A

Increased Hex Body Height

The thicker body creates a deeper nut profile and provides additional material around the threaded section. Its height and thread engagement should be matched to the bolt specification and joint design.

BODY GEOMETRY
B

Integrated Flange Base

The flange forms a wider bearing surface than the hexagonal body alone. It helps spread contact pressure against the mating surface and can reduce the need for a separate washer in applications designed for direct flange seating.

BEARING SURFACE
C

Hexagonal Wrench Engagement

The six-sided exterior allows installation and removal with compatible standard fastening tools. Across-flats dimensions and corner geometry need to correspond with the selected wrench or socket.

TOOL INTERFACE
D

Threaded Connection

The internal thread connects the nut to a matching bolt or threaded stud. Thread diameter, pitch, tolerance and engagement length are important factors in assembly compatibility.

THREAD FIT
02 / DESIGN COMPARISON

Thick Hex Flange Nuts vs. Standard Flange Nuts

Both designs use a hexagonal body and an integrated flange. The main distinction is the body profile, which can affect dimensional clearance, thread engagement and installation requirements.

STANDARD PROFILE

Standard Hex Flange Nut

Uses a comparatively lower hexagonal body with an integrated flange. It is suitable for assemblies designed around its specified nut height and thread engagement.

THICK PROFILE

Thick Hex Flange Nut

Features a deeper hexagonal body while retaining the integrated flange. It is considered when the assembly design calls for a greater nut height or a different threaded engagement configuration.

Selection consideration

A thicker body does not automatically mean higher joint strength. Material grade, thread dimensions, manufacturing tolerances, bolt compatibility and tightening conditions all influence fastening performance.

03 / SPECIFICATION

Key Dimensions and Manufacturing Considerations

Dimensional requirements should be confirmed before production to ensure the nut fits the mating bolt, installation tool and available assembly space.

H
S
D
H Nut height S Width across flats D Flange diameter
Specification Item Information to Confirm
Thread Size Nominal thread diameter and required pitch
Thread Standard Metric or applicable inch-based thread system
Nut Height Overall body height and dimensional tolerance
Across Flats Hexagonal wrench size and tolerance
Flange Diameter Outer diameter and bearing surface dimensions
Material Specified steel grade or other approved material
Surface Finish Required coating, plating or untreated condition
04 / APPLICATIONS

Industrial Applications

Thick Hex Flange Nuts can be used in mechanical fastening assemblies where a hexagonal nut with an integrated bearing flange is specified by the design.

APP 01

Automotive Assemblies

Used in selected vehicle component connections, brackets and structural subassemblies where the specified flange nut geometry meets the joint requirements.

APP 02

Machinery Equipment

Applied in equipment frames, mechanical connections and supporting structures that use bolted fastening systems.

APP 03

Metal Fabrication

Suitable for designated sheet-metal assemblies, fabricated components and mounting structures with compatible flange seating surfaces.

APP 04

Industrial Equipment

Can be specified for equipment housings, mechanical supports and other bolted joints requiring a flanged nut configuration.

05 / PRODUCTION & QUALITY

Manufacturing and Inspection Priorities

For bulk fastener procurement, consistent dimensions and thread compatibility are important to assembly efficiency. Production and inspection requirements should be established according to the approved drawing and order specification.

01

Material Verification

Confirm the material designation and applicable incoming material requirements.

02

Forming and Machining

Produce the hexagonal body and integrated flange according to the specified geometry and manufacturing route.

03

Thread Processing

Check thread dimensions, pitch and fit against the required thread specification.

04

Dimensional Inspection

Verify critical dimensions, including nut height, across-flats size and flange diameter.

05

Finish and Order Review

Confirm the specified surface treatment, packaging and order documentation before shipment.

06 / PROCUREMENT

Information for Thick Hex Flange Nut Sourcing

Providing complete technical requirements helps manufacturers evaluate product compatibility, production feasibility and quotation details.

01Thread size, pitch and thread standard
02Nut height, across-flats size and flange diameter
03Material grade and mechanical property requirements
04Surface treatment and corrosion resistance requirements
05Technical drawings, applicable standards or reference samples
06Order quantity, packaging and delivery requirements

For non-standard dimensions or application-specific requirements, provide a drawing or sample for technical review before confirming the production specification.

07 / FAQ

Frequently Asked Questions

Common technical and sourcing questions about thick hex flange nuts.

What is a thick hex flange nut?

A thick hex flange nut is a threaded fastener with a relatively deep hexagonal body and an integral flange at its base. The hexagonal section provides wrench engagement, while the flange creates a wider bearing surface against the mating component.

What is the function of the flange?

The flange increases the contact area between the nut and the joint surface. This helps distribute bearing pressure over a wider area and may eliminate the need for a separate washer when the joint design permits direct flange seating.

How does a thick hex flange nut differ from a standard flange nut?

The primary difference is the height of the hexagonal body. A thick hex flange nut has a deeper body profile, while both designs incorporate an integrated flange. Actual dimensions should be compared against the relevant product drawing or standard.

Are thick hex flange nuts available in different materials?

Material availability depends on the manufacturer's production range and the required specification. Carbon steel, alloy steel and stainless steel may be considered where supported by the manufacturing process and application requirements.

Can the flange surface include serrations?

Some flange nut designs incorporate serrations on the bearing surface to increase resistance to rotation under specified joint conditions. A smooth flange and a serrated flange are different configurations, so the required design should be confirmed before ordering.

What information is needed for a bulk quotation?

Buyers should provide thread dimensions, material grade, nut height, across-flats size, flange diameter, surface finish, applicable standards, quantity and packaging requirements. Drawings or physical samples are useful for non-standard specifications.

About Xinye

Automotive Fasteners and Precision Metal Components Built on Three Decades of Experience

Zhejiang Xinye Automobile Technology Co., Ltd. traces its business origins to 1995 and specializes in the research, development, and manufacturing of automotive fasteners and metal stamping components. We are China Thick Hex Flange Nuts Manufacturers and Custom Thick Hex Flange Nuts Suppliers & Factory.

Our engineering focus covers fastening reliability, dimensional accuracy, mechanical performance, corrosion protection, and application-specific component development.

  • Flange Nuts
  • Weld Nuts
  • Self-Locking Nuts
  • Bolts and Screws
  • Metal Stampings
  • CNC-Machined Sleeves and Pins
Zhejiang Xinye automotive fastener manufacturing company
IATF 16949:2016 Certified quality management
  • 1995Year our business began
  • 30+ YearsAutomotive fastener experience
  • 500+Product varieties
  • IATF 16949Certified quality management
Capabilities

Core Competitive Advantages

Deep application knowledge, in-house manufacturing, and certified quality management, applied to the most demanding automotive requirements.

More Than 30 Years of Automotive Fastener Experience

Our business traces its origins to 1995, with more than 30 years of experience in automotive fasteners and stamping parts. This long-term focus builds application knowledge in flange nuts, weld nuts, specialty fasteners, and related metal components.

More Than 500 Product Varieties

Standard and non-standard nuts, weld nuts, self-locking nuts, knurled nuts, clinch nuts, sliding nuts, bolts and screws, metal stampings, CNC-machined sleeves and pins, and specialty automotive components.

Integrated Manufacturing Processes

Production is completed in-house from raw materials to finished goods, using automatic cold heading machines, tapping machines, heat-treatment lines, thread-rolling equipment, and hardness testing.

Automotive-Focused R&D and Engineering

More than 30 years of R&D experience in strength grades, tolerance accuracy, corrosion resistance, temperature performance, and MAT self-correcting thread technology.

High-Strength Fastener Development

We develop Class 12 nuts and carry out pre-research on Class 13 to 14 ultra-high-strength nuts for higher axial-load requirements, such as heavy-duty trucks and high-performance engines.

Precision Thread and Dimensional Control

Tolerance control ranges from 0.06 to 0.30 mm for different applications, with a strong emphasis on thread-fit precision. Final tolerances are defined by product drawings and inspection reports.

Corrosion Protection and High-Temperature Options

Trivalent zinc plating with a stated 480-hour salt-spray result, and Zn-Ni alloy plating with stated results of 480 to 720 hours. Temperature-resistance options of 300, 550, and 650 to 700 degrees Celsius for selected applications.

MAT Self-Correcting Thread Technology

The MAT thread nut features a self-correcting function on the first few threads, guiding a slightly misaligned bolt into the correct thread path during automated assembly.

IATF 16949:2016 Quality Management

Certified to IATF 16949:2016. The quality system covers raw material intake, process inspection, and finished-product testing, including tensile, CMM dimensional, pull-off, fusion-depth, destructive weld, and salt-spray tests.

Technical Support from Development to Delivery

Drawing and sample review, material and process recommendations, sample trials, dimensional and performance validation, cost optimization, order tracking, batch traceability, logistics coordination, and after-sales technical support.

Manufacturing

Equipment and Quality Laboratory

In-house production and testing capabilities that support process consistency and product conformity.

Xinye factory production equipment Production

Factory Equipment

Automatic cold heading machines, tapping machines, heat-treatment lines, thread-rolling equipment, and hardness testing support production from raw materials to finished goods.

Xinye factory quality laboratory Inspection

Quality Laboratory

Inspection capabilities include tensile, CMM dimensional, pull-off, fusion-depth, destructive weld, and salt-spray tests across raw material intake, process inspection, and finished-product testing.

Specifications

Key Company Information

Technical highlights that matter when specifying automotive fastening components.

These figures are company-reported. Actual tolerances and performance results should be confirmed against product drawings and inspection reports.

Metric Company Information
Business origin 1995
Industry experience More than 30 years
Product varieties More than 500
Quality certification IATF 16949:2016
Reported tolerance range 0.06 to 0.30 mm, depending on application
Trivalent zinc plating 480-hour salt-spray result stated
Zn-Ni alloy plating 480 to 720-hour salt-spray result stated
Temperature resistance options 300, 550, and 650 to 700 degrees Celsius for selected applications
High-strength nut development Class 12 development; Class 13 to 14 pre-research
Applications

Product and Application Coverage

Automotive fastening and functional components, supported by a broader manufacturing range of nuts, bolts, screws, metal stampings, CNC-machined sleeves, pins, and shafts.

  • Seat belt nuts
  • Interior trim circlips and springs
  • Body tow hooks
  • Sealed nuts for EV battery packs
  • Wheel nuts
  • Seat adjustment shims and spacer nuts
  • Seat adjustment parts
  • Seat-system nuts

Product suitability is assessed against customer drawings, material grade, strength class, thread specification, tolerance, surface treatment, temperature exposure, corrosion requirements, and assembly method.

Customers

Who We Serve

Trusted by B2B buyers who need dependable fastening and metal components built to drawing.

  • Automotive OEMs and Tier 1 / Tier 2 component suppliers
  • Automotive fastening-system manufacturers and assemblers
  • Electric vehicle and battery-pack component manufacturers
  • Commercial vehicle, heavy-duty truck, and engine manufacturers
  • Automotive seat, interior trim, chassis, and body-system suppliers
  • Industrial buyers requiring custom nuts, bolts, screws, sleeves, pins, and metal stampings